Product Description

D Type Bucket



FEATURES

l Deep bottom bucket for agricultural use.

l Optimized bucket design:

-Thicker leading edges for increased abrasion resistance

-Reinforced ribs for greater structural integrity

-Optimum discharge angle

-Large water level for higher capacity

l Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.

 

MATERIAL

■HDPE    ■NYLON     ■PU 

HDPE bucket:Low cost, suitable for handling grains, foodstuffs, and other products without burrs and bulk density less than 1g/cm3. Materials over *0℃ is not suggested.

Nylon bucket:suitable for handling highly abrasive products. Extremely strong. Theyre unsurpassed in rough or severe service elevators. Materials over **0℃ is not suggested.

PU bucket: suitable for handling extremely abrasive material. Theyre excellent for extremely high throughput elevators.

 

TECHNICAL INFORMATION

1. Suitable for high-speed centrifugal discharge.

2. Recommended minimum bucket spacing: width of the bucket projection "B"**5mm, which can be appropriately reduced according to elevator capacity requirement.

3. Recommended elevator velocity <=2.5m/s

4. Recommend usingZ-Y**0% as usable capacity for engineering purpose.

5. For that easy to form lump or masses, suggest install one steel bucket every ten plastic buckets. That steel bucket A & B dimension is more than plastic ones in order to loosen material and reduce abrasion and damage. Consult Sanwei Company for steel digger bucket.